Atlas 9KOHX 9,000 lb Overhead 2-Post Lift w/ LMA Combo

Description
The light duty Atlas® 9KOHX lift is an economy designed overhead, clear-floor 2-post lift. The reliable chain-drive cylinders and dual safety system make this the perfect choice for “Mr. Homeowner” or small commercial shops looking to service cars, SUV’s and light duty trucks.  The 9KOHX can be adjusted to two different height settings, either 11′ 6″ or 11′ 10″, allowing it to fit in almost any standard garage.
The Atlas® 9KOH has symmetric columns and specially designed arms that can be set in either the symmetric or asymmetric position. The asymmetric/symmetric arm design offers an extremely low lift pad position on the EZ-metric lift arm configuration. This low pad height will allow the operator to position the lift arms under most small cars (with low pick up points) and heavier pick up trucks. The Atlas® 9KOHX two post “chain over roller” lifts have a spring loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain.
This combo includes the Atlas® Lawn Mower Adapter or LMA.  The LMA allows the 2-Post lift to better raise ATV’s, UTV’s, and lawn mowers.  The LMA is adjustable along the length of the lifts arms to handle different wheelbase vehicles.  The weight capacity of the LMA is dependent on the positioning of the adapter (higher when the plates are closer to the columns) and the balance of the weight of the vehicle being lifted.
Features
9KOHX

9,000 lb. Capacity

Overhead, Open-Floor design

Overall Height: 138″ (11′ 6″) or 142″ (11′ 10″)

Asymmetric/Symmetric Arms

Automatic Arm Restraints

Dual-Point Lock Release

Rubber Guards on Carriages

Dual Hydraulic Chain-Drive Cylinders

Secondary Lock System

Free 8 Piece Truck Adapter Set

Free set of Sliding Arm Adapters

Mounting Hardware Included

Shipping Weight: 1,450 lbs.

2 yr Structural – 1 yr Hydraulic Warranty – Parts Only

LMA

“Lawnmower” Adapter for 2-Post Lifts

Includes 4 plates and all hardware

Adjustable to fit a variety of sizes and brands (MAY NOT WORK WITH ALL LIFTS)

Up to 5,000 lb. capacity (WILL VARY BY LIFT AND WHEEL BASE)

Can be positioned along the length of the lift arms (LEVELING BLOCKS MAY BE REQUIRED)

Specifications
Atlas® 9KOHX Specifications

Capacity
9,000 LB.

Overall Height
138″ (11’ 6″) or 142” (11’ 10”)

Overall Floor Width
134 1/2″ (11’ 2 1/2″)

Outside Column to Outside Column
124 7/8″ (10’ 4 7/8″)

Maximum Lift Height (Without Adapters)
74 1/2″

Maximum Lift Height (With Adapters)
81″

Minimum Arm Height
4″

Inside Column
110” (9’ 2”)

Drive Thru
100” (8’ 4”) Symmetric/ 90 1/2″ (7’ 6 1/2”) Asymmetric

Column Size
7 1/4″ x 11″

Column Thickness of Steel
5mm

Base Of Lift
14 1/4″ x 18″

Motor/Electrical Requirement
220 volt single (1) phase.A 30 amp breaker is recommended

Oil Requirement
3-5 Gallons AW32/AW46 (NOT INCLUDED)

Shipping Weight
1,450 LBS.

Adapter Heights
4 Each 1.5”, 5”

Arm Hole/Adapter Peg Size
1.5”

Requires a minimum of 4″ of concrete with a 3000 psi. rating
Atlas® Lawn Mower Adapter (LMA) Specifications

Capacity
Up To 5,000 lbs. *

Adjusts In Width
8′ 11″

Wheel Base
32″ to 90″ **

Wheel Well Width
12″

Thickness Of Steel
1/4″ (2 Gauge)

Shipping Weight
600 lbs.

LMA Consists Of Two Wheel Platforms. Lift not included.

* May vary depending on lift and weight distribution. Longer wheel bases on vehicle to be lifted will lower the overall lifting capacity of LMA.

** May require blocks and/or shims at different positions on lift arms to keep wheel platforms stable and level.

Documents
Atlas® 9KOHX Manual
Atlas® 9KOHX Cylinder Bleeding Procedure(Do this immediately after installation)